Tips On How To Fit door locks

Tips On How To Fit door locks

Before beginning:

All windows and doors are possibly susceptible and really should be properly guaranteed to prevent undesirable intrusion.

Two of the most common locks to be equipped on entry doors undoubtedly are a mortice lock along with a cylinder rim lock.

A mortice lock is definitely opened up with a key from both inside and outside the entranceway. This really is referred to as a deadlock.

Mortice locks have Two to seven levers. The greater you will discover the harder the locking mechanism would be to pick. An entrance door have to have at least a five-lever lock approved to BS3621.

Most mortice locks are of ordinary dimensions. An old one can possibly be switched for a new one in the event the distance from the door edge to the handle and/or keyhole is the same.

Cylinder locks are easily changed or maybe replaced whenever you move house, or you lose your keys, as they are just slotted into place and therefore are widely accessible in standard dimensions.

A cylinder rim lock having a deadlock has a key for the outdoors and a knob operated by the key internally. The internal key provides the cylinder lock with a deadlock option. Put simply, it cannot be opened if glass in the door is broken and the knob turned.

A cylinder lock in addition to five-lever mortice deadlock should be built in 45-60cm a part to be as effective as possible.

Mortice door bolts might be fitted in the edge of doors. 1 close to the top and one near to the bottom around the opening edge of a door will give extra security. They might also be used on the hinging edge.

Helpful supplements to security include door limiters, security chains in addition to surfacemounted bolts, which may all be effortlessly built in.

UPVC doors could be damaged by retro-fitted security. If in doubt seek advice from the supplier or even the manufacturer regarding alterations that might invalidate the warranty. Modern-day designs generally incorporate multi-locking systems that don’t need extra security fittings.

Doors together with glazed panels should be fitted with a deadlock since they are significantly less secure compared to solid doors. Take into account replacing glass panels together with laminated or toughened glass.

Make outward opening wooden French doors and windows more secure by fitting them with a mortice sash lock in addition to hinge bolts.

Patio doors in many cases are utilized by robbers so it’s sensible to fit additional locks. Push-to-lock, key-to-open locks are easy to use and also fit if the frame can hold them.

Fit a mortice security bolt

1) Indicate position of bolt on door edge, and then drill a hole to the depth of door bolt as directed by producer.
2) Embed bolt and mark a line round the outside edge of the end plate as a guideline for chiselling.
3) With a chisel, carefully remove enough wood from inside the pencil outline for the door bolt end plate to be neatly recessed and fit snugly.
4) Adjacent to the chiseling, hold the bolt against the inside of the door and accurately mark the position of the keyhole with a carpenter’s awl.
5) Using a drill bit size recommended by the manufacturer, drill a hole through to the hole for the bolt. Do not drill right through the door.
6) To secure the bolt, first drill pilot holes for fixings. A 2-3mm wood bit is an ideal size for the pilot holes. Slide in the bolt and fix in place.
7) Make pilot holes before fixing the key plate in place. The plate must be correctly aligned with the keyhole.
8) Check that key works. As directed by manufacturer, drill a hole for bolt in door frame and fix mortice plate.

Replace a five-lever sashlock

1) Remove the handle on the inside by unscrewing the retaining screws that hold the handle in place. Place the handle to one side to reattach later.
2) Remove the spindle bar that fits through the lock and both handles and place safely to one side as this will be reinserted.
3) Remove the screws that secure the lock. You may need to thread a screwdriver through the spindle hole and pull towards you to release lock.
4) Fit and screw the replacement lock in position. If necessary, chisel out a little more wood from the door edge to ensure the lock fits snugly.
5) Re-position the spindle and inside handle. Check that the new lock works smoothly and engages correctly with the strike plate on the door frame.

Replace a cylinder lock

1) Unscrew the lock body. This needs to be removed but will not be replaced. Just refit the part once the new lockis in place.
2) Unscrew the two retaining screws that go through the door and hold the cylinder part of the lock in place. Keep the mounting plate in position.
3) Remove the old cylinder from the outside. Slide the new cylinder through the drilled hole in the door and refix with the long screws.
4) You can now refit the lock body, but if the connecting bar is too long, remove the lock body and cut the bar down using a junior hacksaw.
5) When the lock body is firmly screwed in position, check that the door opens and closes and the new key works smoothly in the newly fitted lock.

Related Posts