What To Do If Your Automated Garage Door Won’t Open

What To Do If Your Automated Garage Door Won’t Open
electricaldoors-gallery1

You’re late for work, you’ve snapped up your things for the day in a rush, and you’re speed walking towards the garage, hitting the switch on the remote to get to your vehiclenevertheless absolutely nothing is happening; in reality you’ve almost certainly pressed the switch several times at this stage, and still absolutely nothing has happened. What Next?Well, the brief solution is not to stress, as this may possibly be due to something rather simple. To begin with, have you actually examined the remote itself? Is the LED light flashing up once you push the button? If not, then it is more than likely just a dead battery in the remote control. The majority of automatic doors are supplied with more than one remote control, therefore, locate the other one and you should be on your way with your journey. Make absolutely certain you make sure to fit a new battery to the lifeless remote, otherwise the next time this occurs, the solution won’t be so straightforward!

Is the garage door the only way into your garage, or perhaps there’s a service doorway that you could walk through to get on the inside the garage? If the garage door is the only way in, you’ll be able to most likely save yourself plenty of stress by calling your garage door provider immediately and asking for an emergency call-out, because all automatic doors have built-in security locks, therefore if the remote does not open it then that door certainly won’t open from the outside without assistance.

Generally if the remote is lighting-up, then enter the garage by the service door and press the internal operating button; if your door operates normally, then the issue is possibly the remote control signal receiver, which will most likely need replacement.

If your door still doesn’t move, pay attention to check if the motor is operating. If there is no sound, then your motor is dead. This could be simple things like there being no electric power to the garage, so check the interior light and, if that’s also dead, check the house eletrics panel to determine if the garage circuit has tripped, or open and shut the circuit breaker to see if that will restore power.

Whenever the power is working, then your problem is most likely the motor itself, which will certainly require repair or even replacement. In this instance, there is an emergency cord that detaches the motor and drive train from the door mechanism; this is commonly colored red for easier recognition. Pull this cord and, once separated, the door can be opened by hand. Then you can give your garage door provider a ring and set up an appointment for them to come and repair the motor mechanism.

If you can hear the motor operating, however the door isn’t moving, then there will probably be a physical reason/object stopping the door from opening; if this sounds like the case, don’t carry on and press the button, as this might cause additional damage.

First of all, most of us keep a variety of belongings in our garages, which is not unusual for any of these to move because of air drafts or vibration. So ask yourself has something gotten against the inside of the door, or into any part of the mechanism causing it to jam? If so, carefully remove the obstruction and open the door.

If there are absolutely no physical obstructions of the mechanism, check out the optical sensors to see if something has fallen in front of them, making them render the door inoperative. These sensors run using a thin photo-electric beam, and in some cases really small items like a leaf or even spiders’ web in the wrong place could cause them to signal a blockage. If there happens to be no obstructions, look into the lenses to make sure they haven’t yet simply just become dirty.

If none of these possibilities handles the issue, then your sensors may have become misaligned, or even the drive train could be worn out or scratched in some way. None of these are something you can mend quickly, so take advantage of the emergency cable to remove the motor mechanism, and the door should really open manually. Then give your garage door provider a call and make an appointment for one of their technical engineers to come-out and find out the cause for you.

If the door won’t open manually, then there is likely to be some damage to the door springs, or the mechanism itself. Visually check to see that all of the door rollers are still engaged internally within their tracks. If any happen to be outside the track, then the door has become unattached. You must not try to move it, because it will probably fall off completely. This is where you will need to call your garage door provider.

Related Posts